Workbench & Hobby Room

Workbench & Hobby Room

WORKSHOP ORGANIZATION / BASIC PACKAGE for your start

Basic list of Necessary materials and tools for the initial but also necessary organization and equipment of your workshop as a first step always.

In the course and with the development of your constructions, you will certainly create demands from yourself and you will enrich the workshop with more tools and materials. An experienced and long-standing workshop has up to 50 times the volume of tools and materials depending on the scope and quality of the constructions you have set at your personal level and of course depending on your development. You will find in this article a basic package with the necessary materials at a low cost for a good start. You can also get advice and help from specialized modeling stores in your neighborhood. Useful advice from my side is the good quality of the tools you will buy. They should be suitable for modeler use.

BASIC AMATEUR WORKBENCH

1. Amateur dry type air compressor with water trap
2. Fabric connection cable with airbrush (not elastic)
3. DUAL function airbrush with 0.3 -05 nozzle for fine beams and beam stop
4. Airbrush support base on the table
5. Fine nose pliers
6. Hand drill set with drills of various holes
7. Fine file set
8. Skipper
9. Putty (cream) liquid or tube
10. Surfacer for substrate
11. LIQUID glue .
12. Fine brushes .
13. Tamiya masking tape.
14. Crocodile clip base for holding small pieces while painting.
15. 10 basic colors + Varnishes + corresponding brand thinner, for starters necessary (except for those for the kit you will buy)
16. Decal improvement liquid

Your personal additional purchases (outside the package)

White pure alcohol 95 degrees (also from a pharmacy)

Cutting surface

Speed ​​wheel

Pliers + Cutter

Tracing papers (water papers) from No: 800 to 3000

Office lamp

Shelves and table

Cyanoacrylate glue (instant)

PataFIX (like blueTac)

Toothpicks and Cotton Buds (super market)

Model

Colors suitable for painting the .

Remember that tools make the carpenter.
A useful tip: Choose a good chair, as anatomical as possible and adjust it correctly, at the height of your bench. The vertical position of the back is the right one!

https://www.modelclub

https://www.modellingnews.gr/el/airbrush-nozzle-cleaning-needle-washreamer-tool

https://www.midwaysailor.com/models/index.html.gr/forums/index.php?topic=23146.0

https://e-thessalia.gr/30-chronia-latris-toy-montelismoy-me-diakriseis/

RISK AVERSION, SOCIAL MEDIA AND THE HUNT FOR INSTANT GRATIFICATION…