article
Aggressors Camouflage F-5E Tiger II VFC-13 “Fighting Saints”
F-5E Tiger II VFC-13 “Saints” Aggressor Camouflage – How to Achieve the Ultimate Camouflage
Introduction
The “Aggressor” variant of the F-5E Tiger II used by the US Navy’s VFC-13 “Fighting Saints” squadron is not just impressive – it’s a challenge for any serious modeler. If you want to achieve realism and detail, then the right set of paint masks is the first step.
The Story Behind the F-5E VFC-13 “Saints”
VFC-13 is based at NAS Fallon, Nevada and is known for its role as an Aggressor Squadron, i.e. simulating enemy fighters for training purposes. The F-5E, with its small size, great maneuverability and unique variations, is an ideal “opponent” in virtual dogfights.
The “desert” camouflage seen on the VFC-13 F-5E Aggressor replicates the style of aircraft operated by Soviet-aligned air forces in arid climates — such as those of Iraq, Libya, and Syria. By mimicking aircraft like the MiG-21 and Su-22 in desert tones, this scheme provides a realistic training threat for pilots preparing to engage legacy fighters in Middle Eastern or North African combat scenarios.
New Lizard | ||||
FS 33613:8 FS 30117:1.25 | FS 30117:8 FS 33613:1 |
FS 33613 | Radome Tan | Radomes | – | – |
FS 30117 | Earth Red | Camo (Asia Minor, Aggressor) | – | – |
F-5N Tiger II VFC-111 Sundowners
Modeling Fidelity – The Importance of the Right Masks
The camouflage patterns carried by these aircraft are complex and often custom-designed. That’s where the specialized paint mask sets by DN Models, available at GModel Art, provide the ideal solution.
Available Products:
1/48 Aggressor F-5E VFC-13 “SAINTS” Camouflage Painting Mask Set
Ideal for most 1/48 kits (AFV Club, Kinetic, Hobby Boss).
1/32 Aggressor F-5E VFC-13 “SAINTS” Camouflage Painting Mask Set
Perfect for large-scale models such as Kitty Hawk.
Both sets include precision-cut masks for the entire exterior camouflage pattern, along with easy-to-follow application instructions. They allow for full control of the paint job – eliminating runs, overspray, and irregular lines.
Application Tips:
- Ensure the model’s surface is clean and dry before application.
- Apply base colors first, then place the masks according to the instructions.
- Use low air pressure when airbrushing to maintain sharp edges and fine detail.
- Gently remove the masks after the paint is fully dry.
Call to Action
Ready to build an F-5E Aggressor with unmatched realism?
Get your camouflage mask set today from GModel Art’s official eshop and create scale models that truly stand out!